GL200

Industrial LTE cellular router

Industrial router that provides cellular IP connectivity to field equipment, with optional serial ports and remote management.

  • LTE with 3G/2G fallback
  • 2 LAN ports
  • Optional RS232/RS485
Hardware Industrial LTE cellular router — GL200

When a remote site has no fiber or ADSL, or a backup link is needed, what's required is a router built for the field, not for an office. The GL200 delivers industrial-grade cellular IP connectivity, with optional serial ports for equipment that still speaks RS232 or RS485, and remote management so a technician doesn't need to visit.

  • Connectivity where there is no fiber

    LTE with automatic 3G/2G fallback: keeps the link active even with limited coverage.

  • Speaks the field equipment's language

    Optional RS232/RS485 serial port for transparent transmission or protocol conversion, with no need to replace existing equipment.

  • Secure end to end

    Native VPN (PPTP, L2TP) and advanced options (OpenVPN, IPSec) for a private channel to the control center.

  • Remotely manageable

    Remote configuration and updates from an M2M platform, with no need to visit the site.

Ask about this product

01Technical specifications

Technical specifications

  • Cellular connectivity

    • FDD/TDD-LTE with automatic fallback to UMTS/HSPA+ and backward compatibility with GPRS/EDGE
    • Speeds up to 100 Mbps downlink and 50 Mbps uplink
    • Plug-type SIM slot, with automatic voltage detection (1.8/3/5 V)
    • Optional dual SIM
    • On-demand dialing: by schedule, SMS/call, or data-triggered

  • Ports and interfaces

    • 2 LAN ports, 10/100Base-TX with MDI/MDIX auto-sensing
    • Optional RS232 or RS485 serial port, for transparent transmission or protocol conversion
    • Optional 802.11 b/g/n WiFi, AP mode with WDS bridging, WEP/WPA/WPA2
    • Optional GPS for location
    • 50 Ω SMA antenna connectors (main 3G/4G and auxiliary WiFi/GPS)

  • Security and management

    • PPTP and L2TP client VPN; optional OpenVPN, IPSec, HTTPS and SSH
    • TCP/IP stack with Telnet, HTTP, SNMP, PPP and PPPoE
    • Configuration via web interface or via Telnet/SSH and command line
    • Optional remote management from an M2M platform: monitoring, configuration and remote upgrade
    • Hardware watchdog to keep the system stable

  • Power and mechanics

    • Wide-range power input: 7.5 to 30 VDC
    • Supports hot-plug connection
    • Reset button (press and hold for 5 seconds)
    • Status LEDs: cellular signal, WLAN, LAN and serial/console port
    • Industrial-grade design for demanding environments
    • Dimensions: 60 x 80 x 31 mm
    • Hardware watchdog (30 s) and LTE connection-cycle watchdog

02Main applications

Main applications

  • Remote sites with no fiber or ADSL, with LTE as primary or backup link
  • Linking RTUs, meters or other field devices with a serial port
  • Communications redundancy alongside an existing fixed link
  • Secure private networks via VPN to the control center
  • Remote management and updates for equipment deployed in the field
  • Applications requiring local WiFi or GPS geolocation

Solutions using it

Where it is deployed

03Other products

Other products

Need this unit, or a variant of it?

We adapt inputs, outputs, protocols and operating logic to the requirement. Tell us what you need to solve.

Ask about this product